会议名称:2018第3届建筑材料与建筑国际会议(ICBMC 2018)
2018 3rd International Conference on Building Materials and Construction(ICBMC 2018)
所属学科:无机非金属材料,材料加工与处理,材料成形制造与设备,建筑学与建筑技术,土木工程
开始日期:2018-02-23
结束日期:2018-02-25
所在国家:越南
所在城市:越南
具体地点:越南
主办单位:岐阜大学
协办单位:IOP
承办单位:岐阜大学
会议主席:Prof. Low Sui Pheng, National University of Singapore, Singapore
组织委员会主席:Prof Zongjin Li, The Hong Kong University of Science and Technology, Hong Kong
程序委员会主席:Assoc. Prof. Wong Wah Sang, University of Hong Kong, Hong Kong
参会报名截止日期:2018-01-25
摘要截稿日期:2017-12-20
全文截稿日期:2017-12-25
联系人:Ms. Tammy Luo
联系电话:+852-3500-0137
E-MAIL:icbmc@cbees.net
会议注册费:390 USD
2018 3rd International Conference on Building Materials and Construction (ICBMC 2018) will be held during February 23-25, 2018 in Nha Trang, Vietnam
Building material is any material which is used for construction purposes. Many naturally occurring substances, such as clay, rocks, sand, and wood, even twigs and leaves, have been used to construct buildings. Apart from naturally occurring materials, many man-made products are in use, some more and some less synthetic. The manufacture of building materials is an established industry in many countries and the use of these materials is typically segmented into specific specialty trades, such as carpentry, insulation, plumbing, and roofing work. They provide the make-up of habitats and structures including homes.
Civil and Structural Engineering
Bridge Engineering;Building Structure and Bridge Engineering;
Building Technology;Cartography and Geographic Information System;
Coastal Engineering;Computational Mechanics;
Computer Simulation and CAD/CAE;Concrete Structures;
Construction and Control;Detection and Transformation;
Disaster Prevention and Mitigation;Engineering Management;
Environment-Friendly Construction and Development;
Geological Engineering;Geotechnical Engineering;Harbor Engineering;
Heating, Gas Supply, Ventilation and Air Conditioning Works;
Hydraulic Engineering;Material Quality and Control;
Metallic Structures;Monitoring and Control Of Structures;
Operation and Maintenance;Project Management;
Reliability and Durability of Structures;Road, Bridge and Railway Engineering;
Safety and Monitoring;Sanitary and Ground Water Engineering;
Seismic Engineering;Structural Analysis and Design;
Structural Engineering and Disaster Reduction;
Structural Rehabilitation, Retrofitting and Strengthening;Surveying and Geo-informatics;
Surveying and Photogrammetry;Surveying Engineering;
Transportation Engineering;Tunnel, Subway and Underground Facilities;
Urban Planning;Water Supply and Drainage Engineering
Architecture and Urban Planning
Architectural Design and Theories
Advanced Construction Materials
Aesthetics and Landscape
Architectural Design and Its Theory
Architectural Environment & Equipment Engineering
Architecture and Building Materials
Art Design and Landscape Architecture
Building Energy Saving Technology
Building Technology Science
Construction and Renewable Energy Sources
Ecological Architecture
Ecological Construction and Intelligent Control
Energy Conservation and Equipment
Green Building Materials
Green Construction and Environmental Protection
History and Theories of Architecture
Landscape Planning and Design
Traditional Construction Materials
Urban Planning and Design
Materials Science and Engineering
Metallic Alloys, Tool Materials
Superplastic Materials
Ceramics and Glasses
Composites
Amorphous Materials
Nanomaterials, Biomaterials
Multifunctional Materials
Smart Materials
Engineering Polymers
Functional materials
Nuclear fuel materials
Biomaterals, sensors and surfaces
Thin Film Chalcogenide Photovoltaic Materials
Nuclear Materials IV
Magnetic Materials
Materials Properties, Measuring Methods and Applications
Ductility, Crack Resistance, Fatigue, Creep-resistance
Fracture Mechanics, Mechanical Properties
Electrical Properties, and Magnetic Properties
Corrosion, Erosion, Wear Resistance
Non-Destructive Testing
Reliability Assessment, Toxicity
Working Properties of Materials and Products
Large Scale Applications, Electronics Applications
Materials Manufacturing and Processing
Casting, Powder Metallurgy
Welding, Sintering, Heat Treatment
Thermo-Chemical Treatment
Thin & Thick Coatings
Surface Treatment, Machining
Plastic Forming
Quality Assessment
Automation Engineering Processes
Robotics, Mechatronics
Technological Devices and Equipment
Theoretical Fundamentals of Cleaner Production
Industrial Application of Cleaner Production Methods